Ready Remote 24921 Installation Guide download pdf (Page 20)

Feature menu

Default settings are in bold type.

Feature # Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+

1 Engine checking

Virtual

tach

voltage Off tachometer

2 Remote Start Engine

Runtime

12 min

24 min 60 min

3 Park light output Pulsed

Constant

4 Cranking time

0.6 sec

0.8 sec. 1.0 sec. 1.2 sec. 1.4, 1.6, 1.8, 2.0,

4.0 sec

5 Activation pulse count

1 pulse

2 pulses 3 pulses

6 2nd Ignition / Acc

behavior

Ignition

Accessory

7 Accessory output

Off during

wait-to-

start

On during

wait-to-start

8 Status behavior

Normal

Latch rear

defogger

Pulse rear

defogger

9 Diesel wait-to-start

timer

Off

Timed 15 sec Timed 30

sec.

Timed 45

sec.

10 Virtual tach ﬁne tune

0 (as

learned)

100ms to 1 sec ( in 100 ms increments)

11 Factory alarm disarm

pulse

Single

Double

1. Engine checking

1. VirtualTach: battery voltage drop/rise during cranking determines when the starter output is

released. During runtime, constant voltage level is monitored to determine if the engine is running.

2. Voltage: starter output during cranking is a programmed duration (Set in Cranking Time). During

runtime, constant voltage level is monitored to determine if the engine is running.

3. Off: starter output during cranking is a programmed duration (Set in Cranking Time). The remote

start keeps the ignition/accessories active for the programmed runtime whether the engine is running

or not.

4. Tachometer: tach input signal during cranking and runtime determines when the starter output is

released and if the engine is running.

2. Engine Runtime

• 12/24/60 minutes: sets engine runtime during normal remote start operations.

3. Park light output

1. Pulsed: the lights will pulse on/off during remote start.

2. Constant: the lights will turn on solid during remote start.

4. Cranking time

• 0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/4.0 seconds: determines the starter output duration during

cranking for the ‘Voltage’ and the ‘Off’ Engine Checking Mode options.

5. Activation pulse count

• 1/ 2/ 3 pulses: sets the number of remote control commands received or Activation Input required

to activate and de-activate remote start.

6. 2nd Ignition behavior

1. Ignition 2: the relay will emulate the Ignition 1 output during remote start.

2. Accessory 2: the relay will emulate the Accessory 1 output during remote start.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Ready Remote 24921 Installation Guide Page 20

Comments to this Manuals

Related products and manuals for Remote starters Ready Remote 24921